Google Summer of Code 2016

Introduction

KolibriOS is going to apply as a mentoring organization for Google Summer of Code 2016. This page contains our ideas list and some additional information for students and mentors.

We have previously participated as a Mentoring Organization in Google Summer of Code 2014. The ideas page for 2014 is available for your reference. Our organization page for GSoC 2014 and successfully completed projects for that year can be accessed via this link. To our great delight, both successful students of GSoC2014 stayed with the project and continue contributing to KolibriOS voluntarily in their spare time.

In 2013, we have run an independent Summer of Code using money we collected with Kickstarter. Two students have worked on KolibriOS, and the results of 2013 Summer of Code were: adding write support for EXT2 filesystem, and adding (read-only) support for XFS filesystem.

Student Requirements

Prospective students are required to register on our developers forum, register yourself as a student, join the developers chat and submit a small bugfix / improvement to our SVN in order for their application to be considered. Examples of such tasks can be obtained by asking on developers chat or on our IRC channel (#kolibrios @ irc.freenode.net). This requirement is only to show us that you are able to work with our SVN and interact with our developers if you are selected. This task has to be completed before student application deadline (25 March 19:00 UTC).

In addition, students need to answer the following questions when applying:

1. Full Name (First + Last Name).
2. E-mail address.
3. Phone (home or mobile).
4. Another phone for emergency cases (if we cannot contact you) - parents, boy/girlfriend, husband/wife etc.
5. Nickname you plan to use on our forums, SVN repository or IRC chat.
6. Age.
7. Country + city of residence.
8. Human languages you speak (state all languages and knowledge level - basic/intermediate/expert/mother tongue).
9. Name of college or university you are accepted into or enrolled in + link to their website.
10. Name of program (or faculty, or department) in that college/university you are accepted into or enrolled in.
11. Your current timezone in UTC/GMT terms (for example, Paris is UTC/GMT +1 hours right now).
12. Have you been involved with any open-source project in the past? If yes, which one, and what have you done for that project?
13. Code samples - please provide links to code that you have written. It can be your high school project, contribution to open-source organization, your college/university task or anything like that.
14. The task you are willing to work on from our list of Summer of Code 2016 ideas (or suggest your own idea, if you don't like any of the proposed ideas). Please provide an approximate work plan for your task split to 1-week intervals, as well as expected outcome of your work. This point should be detailed as much as possible, as your application would be evaluated mainly based on what you write here. You are welcome (and even encouraged!) to collaborate with potential mentors on this paragraph.
15. What other time commitments, such as school work, university studies, another job, planned vacation, etc., will you have between May 23 and August 23 (coding period)? Please be as specific as possible. Bear in mind that GSoC is like a full-time job, so if you consider taking a summer semester at the university (with more than 1-2 courses), or intend to perform an internship or work elsewhere during the summer in addition to GSoC, you will likely be NOT accepted.

Organization

You can find the organizers on the IRC channel (#kolibrios @ irc.freenode.net) or at our forum: http://board.kolibrios.org/

Name	Nickname	Role
Dmitriy Smirnov	Pathoswithin	Administrator for GSoC, mentor
Jeffrey Amelynck	hidnplayr	Mentor, backup administrator
Kiril Lipatov	Leency	Mentor
Ashish Gupta	ashmew2	Mentor
Sergey Kuzmin	Wildwest	Mentor

We have discussed "Google Summer of Code 2016" application with all active members of the KolibriOS Project Team, and selected only those 3 (three) people who have both the knowledge, the dedication, and the time to help their students during the entire summer. Each one of them was assigned to mentor projects in his area of specialization only. In a rare event when a Mentor from the above list cannot continue mentoring his student(s) due to personal circumstances, we will try to find a replacement Mentor, or ask the remaining Mentors to cover for the missing one. Additionally, there is always a number of knowledgeable members of our team hanging around our forum chat, and they will gladly answer any student questions that may arise, even if they haven't volunteered as Mentors themselves.

Most Mentors selected for this year are the same that were originally proposed for last year, and they have already proved to be responsible, helpful and knowledgeable during GSoC2014.

Ideas for Google Summer of Code 2016

The below list contains ideas suggested by KolibriOS team members. It is neither complete nor final.
Students are welcome (and even encouraged) to suggest their own ideas for GSoC, provided they can find a mentor amongst KolibriOS developers to guide them.

Sortable list of ideas for easy navigation

Idea Name	Area	Required Skill Level	Importance for KolibriOS	Programming Language	Mentor
XDXF dictionary	Application	Basic	Low	Assembler(FASM)	Pathoswithin
CPUID tool	Application	Beginner	Low	Assembler(FASM)	Wildwest
FTP client	Application	Basic	Medium	Assembler(FASM)	hidnplayr
Torrent client	Application	Advanced	High	Assembler(FASM)/C/C++	hidnplayr
XMPP/Jabber client	Application	Intermediate	Medium	Assembler(FASM)	hidnplayr
Music player	Application	Advanced	Medium	Assembler(FASM)/C/C++	hidnplayr
Web browser	Application	Intermediate	High	Sphinx C--	Leency
Ethernet driver(s)	Driver	Advanced	High	Assembler(FASM)	hidnplayr
SD Host Controller driver	Driver	Advanced	Low	Assembler(FASM)	Pathoswithin
USB device drivers	Driver	Expert	High	Assembler(FASM)	hidnplayr
Filesystem support	Driver	Expert	High	Assembler(FASM)	Pathoswithin
Wi-Fi	Driver	Expert	High	Assembler(FASM)	hidnplayr
Widget toolkit	System wide task	Intermediate	High	Assembler(FASM)	Pathoswithin
QR-code in boot log	Kernel/Library	Basic	Low	Assembler(FASM)	Pathoswithin
C layer for KolibriOS	Library	Intermediate / Advanced	Medium / High	C	Ashmew2
Virtualbox support for KolibriOS	Library	Advanced	Medium	C	Ashmew2
Port PolarSSL	Library	Intermediate / Advanced	High	C / FASM	hidnplayr / ashmew2
Port ScummVM	Library	Intermediate / Advanced	Medium	C / FASM	hidnplayr / ashmew2

Explanation of required skill level:

• Beginner: No knowledge at all of the topic,
• Basic: A very basic knowledge of the topic but no professional usage,
• Intermediate: A basic knowledge of the topic but no regular professional usage,
• Advanced: A good knowledge of the topic and a regular professional usage,
• Expert: a perfect knowledge of the topic and a daily professional usage.

Explanation of importance for the project:

• Low: For sure it doesn't hurt to implement, but if nobody does it, no one will even notice.
• Medium: Nice-to-have feature. Will improve everyday life of users and developers.
• High: This feature is needed for the project to start being adopted by masses.

Applications

These are userspace tasks. They often require only basic knowledge of algorithms and data structures.
No specific experience is required but welcome.

XDXF dictionary

Summary: Write dictionary application with support of XDXF (XML Dictionary eXchange Format)

Details:

• Primary goal: Write library and corresponding dictionary application
• Additional goal: Support of other dictioinary formats
• Language: Assembler/FASM
• Skill level: basic
• Importance: low
• Mentor: Pathoswithin
• Links: fasm xml library, XDXF format

CPUID tool

Summary: Update existing CPUID application to be aware of new CPUs and their features

Details:

• Primary goal: Write code to detect and report new CPUs and features + size detection for caches
• Additional goal: Refactor code as to use system libraries (libimg, box_lib, etc.)
• Language: Assembler/FASM
• Skill level: beginner/intermediate
• Importance: low
• Mentor: Wildwest
• Links: CPUID program, Intel cpuid, AMD cpuid, forum topic about application

FTP client

Summary: Create a GUI based FTP client or add FTP support to one of the existing file managers

Details:

• Primary goal: FTP access (download/upload/etc.)
• Additional goal: Create an FTP client library
• Language: Assembler/FASM
• Skill level: beginner/intermediate
• Importance: High
• Mentor: hidnplayr
• Links: File Transfer Protocol (RFC959), CLI FTP client (demo)

Torrent client

Summary: Write a (bit-)torrent client for KolibriOS, or port an existing one

Details:

• Primary goal: Implement a torrent client similar to µTorrent Free edition
• Alternative goal (less preferred, but still possible): Port an existing torrent client to KolibriOS
• Language: Assembler/FASM
• Skill level: intermediate/advanced
• Importance: High
• Mentor: hidnplayr
• Links: Information about the protocol

XMPP/Jabber client

Summary: Write a XMPP/Jabber library and client for KolibriOS

Details:

• Primary goal: Write basic xmpp library/client
• Additional goal: Implement some xmpp extentions
• Language: Assembler/FASM
• Skill level: intermediate/advanced
• Importance: High
• Mentor: hidnplayr
• Links: XMPP spec, XMPP extentions, Unfinished XMPP client for KolibriOS

Music player

Summary: Improve the current music player in Kolibri

Details:

• Primary goal: Rewrite the current music player (ac97snd), in FASM, and improve its functionality

• Support for file formats wav, mp3 and xm (using available external libraries)
• Support for playlists (m3u)
• A time display

• Additional goal:

• Use of system wide hotkeys to control player
• Support for metadata (ID3, ...)
• More codecs (flac, vorbis, ...)
• Audio indication (oscillograph, bar graph, ...)
• Show cover art from files or album folder
• Fade in/out and/or crossover
• Streaming radio (at least mp3 over http stream)
• Skins
• Media library

• Language: Assembler/FASM (C/C++ to port codec)
• Skill level: intermediate/advanced
• Importance: High
• Mentors: hidnplayr
• Links: AC97SND (MP3 player in C), Sound drivers and architecture, Flac decoder,Minimp3 (minimalistic mp3 decoding library), SuperMP3 (IDv3 tag demo)

Web browser

Summary: Improve existing text-only web browser Aelia (ex WebView) - add more functionality and compatibility

Details:

• Primary goal: Have mostly complete HTML4 support on a good enough level to read non-complex (mobile?) websites
• Secondary goal: Add certain elements of CSS, speed optimizations
• Language: Sphinx C--. May require writing a few lines in FASM though
• Skill level: intermediate/advanced
• Importance: High
• Mentors: Leency

Links:

• HTML 4.01 Specification
• Work done so far on WebView (mostly in Russian). If you don't know Russian, you can read English translation using Google-Translate

Port ScummVM

Summary: Port ScummVM to KolibriOS.

Details:

• Primary goal: Port ScummVM to KolibriOS so that users can enjoy a wide range of already available software that runs on it.
• Secondary goal: Optimize for KolibriOS
• Language: C / FASM
• Skill level: intermediate / advanced
• Importance: Medium
• Mentors: hidnplayr / ashmew2

Links:

• ScummVM website, Old ScummVM port for MenuetOS

Drivers

Writing drivers is about supporting new hardware and filesystems.
Knowledge of specifications and previous experience are not required but surely desirable.

Ethernet driver(s)

Summary: Write an Ethernet driver

Details:

• Primary goal: Support for popular Broadcom, Atheros or Marvell Yukon ethernet cards
• Additional goal: A second driver for another card family, PPPoE support in kernel, ...
• Language: Assembler/FASM
• Skill level: intermediate/advanced
• Importance: Medium
• Mentor: hidnplayr
• Links: BCM57xx programmers guide, Writing network drivers for KolibriOS, BCM570x driver for u-boot (in C), Stub for BCM57xx driver

SD Host Controller

Summary: Add support for SD Host Controller

Details:

• Primary goal: Write driver for particular controller
• Additional goal: Test and update driver to work for all controllers
• Language: Assembler/FASM
• Skill level: intermediate/advanced
• Importance: Low
• Mentor: Pathoswithin
• Links: SD specifications

USB devices

Summary: Add USB drivers for the new USB stack (webcams, gamepads, joysticks, tablets, etc.)

Details:

• Primary goal: Write USB driver for currently unsupported device (you should have one)
• Additional goal: Adopt code to work with all devices of the same class
• Language: Assembler/FASM
• Skill level: Expert
• Importance: High
• Mentor: hidnplayr
• Links: USB device classes

Filesystem support

Summary: Improve filesystem support in KolibriOS

Details:

• Primary goal: Update/fix read-write support for ext2/3/4 filesystems (partially done)
• Additional goal: Any improvement of filesystem support in KolibriOS
• Language: Assembler/FASM
• Skill level: intermediate/advanced
• Importance: High
• Mentor: Pathoswithin
• Links: Filesystems in KolibriOS

Wi-Fi

Summary: Add Wi-Fi support to KolibriOS.

Details:

• Description: Write or port a Wi-Fi driver for KolibriOS, implement the ability to set a wireless connection.
• Language: Assembler/FASM
• Skill level: Expert
• Importance: High
• Mentor: hidnplayr
• Links: Comparison of open source wifi drivers

System wide tasks

These tasks comprise both user space and kernel space work. Some developers consider them as of most importance for KolibriOS.
Architecture and algorithm design skills are highly desirable.

Widget toolkit

Summary: Extend Box_lib (a set of separate widgets) to create a full-featured widget toolkit

Details:

• Primary goal: Design architecture and implement focus handling, callbacks and other core ideas
• Additional goal: Integrate box_lib widgets to this framework
• Language: Assembler/FASM
• Skill level: beginner/intermediate/advanced
• Importance: High
• Mentor: Pathoswithin
• Links: basic idea, list of toolkits

QR-code in boot log

Summary: Add a QR-code (containing the debug log) at the end of boot process

Details:

• Description: Sometimes KolibriOS cannot boot on a certain hardware configuration (gets stuck during or after boot process). In such cases, we request the user having this problem to enable debug log at boot time, take a photo of the screen and show it to us (in the forum). However, sometimes taking a good quality photo can be quite challenging (bad camera, shaking hands etc.) and the attached photo is so blurry to the point the debug log cannot be even read. The idea suggested hereby is to simultaneously encode the debug log which is outputted on the screen, to the form of QR-code, and show the resulting QR-code on empty space on the screen. In such way, any user possessing a smartphone with a camera and QR-code scanner, could scan the QR-code and submit the encoded text directly on our forums (without having a need to take a photo), and our developers, in turn, would get the debug log text immediately and won't have to unscramble a blurry photo.
• Language: Assembler/FASM
• Skill level: beginner/intermediate
• Mentor: Pathoswithin

C layer for KolibriOS

Summary: Building a C layer for KolibriOS, so that we can get more developers and port more code to KolibriOS more easily.

Details:

• Description: As a lot of software out there is available in C and useful for KolibriOS, building an ecosystem around C and FASM is required. Some work towards a cross compiler has already been done. Since KolibriOS is neither Linux, nor Windows..it is challenging to port software. In order to automate this, we need to port existing libraries and figure out a way to automate/streamline this process. The best part about this is that you get to mix C and FASM in unprecedented ways and learn along the way. The end result should be as easy as writing a Makefile and calling the cross compiler which creates a binary for Kolibri OS. The eventual aim is to have libraries in C available for KolibriOS which let you use the same ASM procedures in C code. Some work on this has already been done. Get in touch to know more!

Example:

   #include<kolibri.h>
   int main()
    { 
    kolibri_window("Hi!");
    return 0;
    }

• Language(s):

• C - Required
• FASM <Not a strict requirement, but is desirable>
• GNU Autotools (Easy to pick up, safe to assume optional).

• Skill level: intermediate, bonus points for the ability in designing a clean approach to achieve this.
• Mentor: ashmew2
• Additional details: This project relies on working with the mentor on completing this project as it might be too large to be finished by a single student over one summer. The mentor will also actively work on the same project with the student.

Virtualbox / QEMU support for KolibriOS

Summary: Building Virtualbox / QEMU support for KolibriOS so that it is easier to use in a virtual machine.

Details:

• Description: Create a set of tools which let KolibriOS seamlessly interface with a host running Kolibri via VirtualBox. Develop parts required, especially shared folders, which resemble Guest Additions. (For a Linux based Host running KolibriOS as Guest.)

If not virtualbox, QEMU could use some feature enhancements for example the ability to update a usb drive from outside Kolibri and make Kolibri understand the new contents of the usb drive. This requires investigation skills as well as working in both Kolibri for support and QEMU / Virtualbox source code (as and when required).

• Language(s):

• C - Virtualbox Source code
• FASM - To understand the source code of KolibriOS better and prepare interfaces with Guest additions.

• Skill level: Advanced [ Unknown ], ability to understand a larger source code base and contribute to it are very desirable!
• Mentor: ashmew2

Port PolarSSL

Summary: Port PolarSSL to KolibriOS. Details:

• Primary goal: Make a working port of PolarSSL (as native KolibriOS MS COFF library) and add it to the automatic build-system.
• Additional goal: Update HTTP library (written in FASM) to support HTTPS.
• Language: C / FASM
• Skill level: intermediate / advanced
• Importance: High
• Mentors: hidnplayr / ashmew2
• Links: Forum thread about polarSSL, HTTP library on WebSVN

Miscellanous / Crazy Ideas

These ideas are not necessarily suited for a GSoC project but I think would be good to have.

Combine Forum Chat and IRC

Summary: Transfer Forum Chat messages to IRC and IRC messages to Forum Chat. Details:

• Background: It would help keep the growing KolibriOS community together. It would also be useful for developers as they can have IRC alerts built into IRC clients but no alerts for Forum Chat. I already wrote an IRC bot for #kolibriOS based on Willie and it would be desirable to integrate this feature with that bot.

• Language: Python for IRC Bot / Not sure about Forum Chat watching (Maybe Selenium script?)
• Skill level: beginner / intermediate / learner : want to learn about this stuff
• Importance: High
• Mentors: ashmew2
• Links: IRC Bot Source Code

Rough Guide for Prospective Students

• As the kernel is written in FASM, ability to write and understand i386-assembly code is very useful.
• C is also a plus as some applications/libraries and components are written in C. Also, C is useful to interface with assembly at times.
• Familiarity with the GNu landscape like Autotools, GCC etc are also a plus to have (especially for porting software)
• The desire to take challenging problems and solve them is also required as several parts of the code base require thought for design and implementation. (The mentors can help you with that :) )
• Hanging out on Freenode's #kolibriOS , and our Chat (accessible through kolibrios.org -> Forum -> Chat) are where developers mostly hang out.
• Languages used for communication are Russian and English (although most developers are bilingual, and you can always ask someone for help)
• Get in touch with other developers via IRC / Chat / Forums and enjoy your stay!

I'm a potential GSoC student. I'm scared of all the assembly and docs here! Where should I start?! :'(

Start here : http://wiki.kolibrios.org/wiki/HowTo This will help you set up KolibriOS. Easiest will be to use either Qemu or VirtualBox as most developers use it and thus will be able to help you with eventual problems. Feel free however to try something else and let us know how it goes!

I'm a potential GSoC student. What is this test task?!

Regarding the test mentioned above, it is for assessing your current skill set and their relevance regarding the project that you want to eventually work on. In most cases, your potential mentor will assign you a task via IRC / Forum Chat but another developer can do this as well . Meanwhile, In case you are waiting for a test task, you can go through our bug tracker and find a small task to work on yourself, or learn about KolibriOS by going through example code.

I want to play with the code but my college blocks SVN

If you are have trouble accessing, please do mention it on the forums. You can temporarily use this backup git repository: http://repo.or.cz/w/kolibrios.git

All the ideas seem interesting, But..

Feel free to suggest your own idea! This is encouraged largely both in GSoC and KolibriOS. The mentors will be glad to such an idea and assess it's feasibility / usability for Kolibri.

Great Guide! But I still don't understand X

Please read Documentation / Development pages on this Wiki. If you have any doubts, feel free to connect with other KolibriOS users and developers through Forum Chat or #kolibrios on Freenode. Please ask developers / mentors on Forum Chat or IRC . Please be patient on IRC and Forum Chat as developers are on different time zones and it might take a few hours to get back to you. You can also start a Forum thread if it is about something you feel is a general issue.

Most importantly...Have Fun!